Rena DA615 Bedienerhandbuch PDF herunterladen (Seite 19)

DA615 Operations Manual 3 Rev. 3/23/00

Programming mode

The printer is delivered with factory default menu settings. To change the print

quality, for example, you must go into programming mode.

What is programming

mode for?

Programming mode is used for the manual setting of specific parameters via the

control panel.

The “Menu Table” section lists the menu fields and their options.

+ If you print from a DOS based program, or Windows based program, in conjunction

with the Generic Text Only, or Standard Text Only printer driver, the printer set-up

can be changed by using the RENASET program, by sending escape sequences from

software, or manually by using the printer’s programming mode.

+ IMPORTANT! If you are using a Windows based program in conjunction with a

Rena printer driver, the Windows program must be used to control most of the

features in the printer. In other words, if you setup the printer, via the printer’s

programming mode, or RenaSet program, these settings will be over-ridden (reset) by

the Windows program.

When using a Windows program, in conjunction with a Rena printer driver, do NOT

set the Menu Feature: “Setting Locked” to yes. Doing so will cause image printing

problems and positioning problems. However, you should be sure the Paper Size is

properly set, and “Local Locked” within the printer’s menu. For more detail about the

Menu Features: Paper Size and Setting Locked, please see the chapter entitled

“DA615 Menu Feature / Option Definitions”

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 53 54

Keine Kommentare

Rena DA615 Bedienerhandbuch Seite 19