Rena Envelope Imager CS Bedienungsanleitung PDF herunterladen (Seite 39)

SECTION 5

TROUBLE SHOOTING

LED Status Indicators

Printer LEDs

The buttons and LEDs are shown below. The LEDs on the printer

indicate the status of the printer.

1 - PAPER Button and LED

2 - CANCEL Button and LED

3 - Soft Power Button and LED

LED Status Indicators:

LED Status Possible Cause Possible Solution

Soft Power LED is on steady.

Printer is powered on. Waiting for data. Send your print job.

Soft Power LED is flashing

Printer is receiving/processing

data.

The LED will stop flashing when the printer has

received processed all the print data.

Printer is out of paper or there

was a hesitation in paper feed

Place paper in the hopper, and then press the

PAPER button. The printer will continue to feed and

print.

PAPER LED is flashing and

Soft Power LED is on

Paper is jammed in the printer. 1. Turn the printer off using the Main Power

switch.

2. Remove paper from the hopper.

3. Remove any paper obstructions from the

printer.

4. Check/Adjust separation and guide settings.

5. Reload the paper.

6. Turn the printer on using the Main Power

switch.

7. Resend the print job.

PAPER LED is flashing and

Soft Power LED is off

Paper stall or problem with the

printer

1. Turn off the printer and disconnect the

power cable and other printer cables.

2. Re-connect the power directly to a wall

outlet (without a power strip or surge

protector) and other printer cables.

3. Turn the printer on.

4. If the printer still does not work, have it

serviced.

Continued on next page.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 48 49

Kommentare zu diesen Handbüchern

Keine Kommentare

Rena Envelope Imager CS Bedienungsanleitung Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucker Rena Envelope Imager CS